Make sure the turntable’s Bluetooth is set to out. Then turn on your desired Bluetooth speaker of headphone, and make sure they are in pairing mode. Once they are, once your turntable is on, and Bluetooth set to out, press the Bluetooth button. This will initiate the pair.

NOTE: If not connected in 20-30 seconds, press the Bluetooth pair button again on your turntable to re-initiate the pairing.

You should then pair it with your desired device.

The Revolution turntable has a line-out level signal. This means, it can be wired into any active speaker without the need for an external amp. However, if you have a set of passive speakers, you may need an external amp – although the Revolution does have a passive speaker out port, specifically designed for the Marley Passive speakers that are part of the Revolution with Speakers product.

Yes, you can play any speed vinyl on this turntable. It as a 33 1/3, 45 and even 78 RPM speed settings. There is no vinyl the Revolution cannot spin!

The plinth is made from a real bamboo veneer on MDF. Both sustainable, bamboo is great as it is extremely renewable – with some strains growing upto a meter in a day. MDF is created from recycled wood fibers and waste that would otherwise be discarded. It reduces the need for new timber. The REWIND fabric that covers the Revolution is made from organic cotton, reclaimed hemp and rPET (which is recycled plastic bottles). All the plastic components you see, and the chassis are created from recycled ABS. And finally, the tone are is made using stainless steel, this is a great material as it is highly durable, recyclable, and can be reused without losing its strength or quality, reducing the need for raw materials.

Yes! The Revolution turntable is super easy to set up. Just pop on the felt slipmat, slide the counterbalance all the way, tighten it, plug it in, and you’re good to go. No need to adjust the tracking force or counterbalance—it’s perfectly calibrated for the pre-installed Audio-Technica stylus.